Bradford White Water Heater Replacement & Repair in Las Vegas, NV

A Bradford White water heater is a trade line.

You will not usually grab one off a retail endcap the way you might a consumer tank.

Water Heaters Today LLC sources, replaces, and repairs these gas and electric units across the valley - Defender Safety System atmospheric tanks, ICON System gas valves, and electric models that still need proper elements and breakers under hard-water duty.

Homeowners call when a plumber left one in the garage years ago and it is now rumbling, leaking, or stuck on a pilot that will not stay lit.

Others ask for the brand because their last unit outlasted a store special.

Either way, the install has to meet Clark County straps, pans, expansion, and venting - retailer stickers do not override code.

Most search demand for this brand here is repair - no hot water, a pilot that will not stay lit, or an ICON code that will not clear. On gas tanks in the valley, the usual offenders are:

• Pilot that lights then dies - thermocouple, gas valve, or draft issues
• ICON System status blinks that point to sensor or ignition lockouts
• Defender / FVIR screens loaded with garage dust so the burner will not run clean
• Hydrojet inlet clogged with sediment until recovery collapses
• Anode gone thin after years of mineral load

Electric units track the same path as other 240V tanks: lower element first, then ECO reset trips.

We diagnose before parts fly.

Cross-brand triage sits on water heater repair; gas-control depth is on gas water heater repair; element work is on electric water heater repair.

Pilot and thermocouple jobs also map to pilot light repair and thermocouple replacement.

Because the brand sells primarily through wholesale / trade channels, "dealers near me" searches rarely land on a retail aisle.

DIY purchase is harder than a big-box walk - and a self-install still hits permit and warranty risk.

We act as your local source for the unit and the install: procurement, haul-away, code hardware, and registration so the serial plate starts the factory term cleanly.

A like-for-like residential swap typically lands in our $1,800-$4,000+ installed band.

Clean 40- or 50-gallon atmospheric jobs sit toward the lower-to-mid range; power-vent, fuel change, relocate, and panel work climb.

Parts repairs when the shell is sound usually run about $250-$600+.

Full install scope across brands is on water heater replacement.

Most valley calls for this brand are storage tanks - gas for recovery, electric where there is no flue path.

Tankless makes sense when you want continuous hot water and will maintain descaling in hard water.

General planning is on tankless water heaters.

If you are brand-shopping against a Rheem quote, start at Rheem; on-demand details are at Rheem tankless.

We do not force a tankless conversion to inflate the ticket. If a standard tank still fits the load and the vents already work, that is often the faster, cleaner path.

When replacement beats repair, the run is practical:

1. Isolate fuel or breaker, drain, and remove the failed unit.
2. Set the new tank with straps, pan, water lines, and expansion tank as required.
3. Reconnect gas with drip leg and listed venting - or electric with correct wattage elements and breaker.
4. Fire or energize, prove temperature and draft / amp draw, walk shutoffs.
5. Register warranty and pull permits when the jurisdiction requires them.

Same-day finishes are normal when stock and trucks align. Emergency no-heat visits get priority openings; flush-and-anode maintenance visits keep ICON lockouts and sediment rumble from becoming a midnight outage.

The glass lining and sacrificial anode protect the steel - until valley minerals empty the anode and leave the lining alone against sediment.

Skipping flushes is how pilot assemblies and elements die early.

Closed systems also need a healthy expansion tank; a waterlogged one sends pressure to the T&P so the heater looks "leaky" when the real problem is downstream.

Looking for Bradford White parts near you?

We stock common-compatible anodes, thermocouples, and elements so many first visits close without a return run - see water heater parts, anode rod replacement, and heating element replacement.

If the ICON valve is faulting repeatedly on a tank older than about a decade, we will say so up front instead of stacking valves until the shell decides the schedule for you.

Water Heaters Today LLC (#0092824) replaces and repairs Bradford White from 336 Auster Park Ave, Las Vegas, NV 89148.

Specialist water-heater crew, upfront quotes, 30-day labor guarantee, no after-hour fee games.

We cover Henderson, North Las Vegas, Summerlin, Spring Valley, Paradise, Enterprise, Sunrise Manor, Whitney, Boulder City, and the rest of the valley.

Need a trade-grade tank or a diagnostic on the one you have? Schedule service or call (702) 305-8750 - that is our local shop line, not the manufacturer call center.